Overview

The KMD18010 outdoor dining chair is available as a single chair and can be ordered in any quantity to suit your project. The powder-coated aluminum frame is light, strong, and fully rust-proof — a reliable base for any outdoor setting. The armrests and side panels are wrapped in weather-resistant pleated straps with a clean vertical pattern that gives the chair a polished, high-end look while holding up well against sun and moisture.

The seat and back cushions are thick and padded, using outdoor-grade fabric that repels water and resists UV fading over time. Cushion covers are removable and easy to wash. The compact frame design saves space, making it easy to arrange in tight outdoor dining areas. Neutral beige and dark gray tones work with most table styles and outdoor decor.

Benefits

A Strong Match for Boutique Hotel Courtyard Dining
Boutique hotels need furniture that looks refined and holds up to daily outdoor use. The KMD18010's clean lines and pleated armrest detail give it a premium feel that suits high-end courtyard or garden dining areas. The low-maintenance frame and easy-clean cushions also help hotel staff keep the space looking neat with minimal effort.

Practical and Stylish for Outdoor Event & Wedding Venues
Outdoor event spaces and garden wedding venues need chairs that look good and are easy to move and arrange. The KMD18010's compact, lightweight frame makes it simple to set up for different layouts. The neutral beige and gray tones photograph well and fit most event styling themes without needing extra decoration.

Outdoor Chair OEM

01

Send us your design

Start the customization process by sending our team a copy of your design through available channels. If you don’t have a design yet, our designers can work with you to have one done.

02

Revise, review and finalize

Our team will adapt your existing design for the current project and will provide professional recommendations on how to elevate the design to fit your budget or requirements.

03

Mould making and revising

Once we get your approval, we start creating molds and cut the wood parts according to the design, constantly checking to ensure everything fits and works as intended.

04

Sample making and modifying

We will assemble a sample and send it to you for approval, where requested modifications will be addressed before proceeding with full-swing production.

Customize

Frame Strength, Lightness & Finishes

KMD18010 is built on a 6063 aluminium (aluminum) frame engineered for high strength at a low weight, making it easy for staff to handle while remaining exceptionally robust in daily commercial use. The structure has been tested to a static load of 300 kg+, giving you confidence for hotel and restaurant environments. Finishing options include our standard architectural powder coat or a refined wood-effect powder coat. Both finishes are formulated for outdoor performance—resisting corrosion, weathering and UV fade in coastal and poolside settings—while keeping maintenance simple and predictable across multi-property programs.

Rope System Specifications

The handwoven rope is specified for hospitality conditions. Its UV-stable fibres help retain colour and tensile integrity for 3+ years in high sun, while a salt-neutral formulation protects against fibre degradation in marine air. With approximately 5% engineered stretch, the weave conforms comfortably to the body without sagging, returning to form after each use. We offer multiple rope colourways and alternative fibre options (EQ/PL) to align with your design palette and performance needs.

Cushion Engineering

Choose between standard comfort cushions for covered dining or quick-dry cushions where splash, rain or high humidity are expected. Both options pair supportive cores with removable covers for fast changeover and laundering. Fabric selections can be matched to your brand standards, with recommendations available for lightfastness, abrasion resistance and cleanability to suit the site’s exposure.

Branding & Logo Customization

For a cohesive guest experience, we provide several discreet branding methods. Embroidery is available in up to five colours for cushions, while jacquard woven tags can be Pantone-matched for precise brand control. Where required, a subtle frame mark can be positioned out of primary sightlines so the chair reads premium on the floor while remaining unmistakably yours on inspection.

Maintenance & Care

Routine care is straightforward. Rinse the frame and rope periodically with fresh water to remove dust or salt; use a mild soap solution for heavier soiling. Avoid abrasive pads and solvent-based cleaners to preserve finish lustre. In coastal installations, a brief weekly freshwater rinse is recommended to minimise salt buildup. Cushion covers are removable; follow fabric guidance for washing and always air-dry before reuse.

Packaging & Shipping

Chairs are protected in export-grade cartons with reinforced corners to prevent transit scuffing. For volume orders, we offer efficient stack-pack configurations to maximise container yield and reduce landed cost. Palletisation and mixed-SKU loading are available for project deployments. Our typical production lead time is 30 days, and our logistics team supports global freight and documentation to your port or door.

Compliance, Testing & Documentation

Each production run follows staged QC, from frame fabrication through finishing, weave, upholstery and final inspection. On request, we can supply load and seam-strength test data aligned to hospitality benchmarks, salt-spray and colour-fastness information, and certificates of origin. Finish and material swatches are available for design approval and project submittals.

Dimensions & Ergonomics (optional to display)

Seat height, back angle and arm positioning are set for dining comfort and efficient table clearance, supporting long, relaxed seating without bulk. If your venue has specific table heights, we can adjust glide height or seat pad thickness during sampling to fine-tune ergonomics.

Sustainability & Material Traceability

Frames use recyclable aluminium, and our powder-coat process is selected for low-VOC application compared with liquid paint systems. Where project standards require, we can provide material composition details and work with fabric mills offering recycled or solution-dyed yarns to reduce water and dye consumption.

Warranty & After-Sales Support

KMD18010 is supported by Kingmake’s 5-year warranty on frame and finish under normal commercial use, with coverage options available for rope and cushions depending on fabric selection and site conditions. Our team provides replacement parts, covers and service guidance to keep fleets looking consistent across seasons.

Colour & Finish Library

We maintain a curated library of RAL tones and wood-effect finishes alongside rope and fabric swatches. Submit your mood board or brand guide, and we’ll assemble a coordinated materials pack—frame, rope and textile—that balances aesthetics, durability, and maintenance for your specific environment.

FAQs

Q1: Is the rope suitable for strong sun and coastal air?
Yes. The rope is UV-stable and salt-neutral, helping retain color and performance in seaside and high-UV environments.

Q2: Do you offer quick-dry cushions?
Yes. Choose quick-dry cores for poolside or high-moisture areas; standard cores suit covered dining spaces.

Q3: What finish options are available for the frame?
Standard RAL powder coat and wood-effect powder coat, both formulated for outdoor corrosion and UV resistance.

Q4: Can we add our logo?
Absolutely—embroidery, jacquard woven tags, and discreet frame logos are available to match brand guidelines.

Q5: How should we clean and maintain the chair?
Rinse with fresh water, use mild soap, and avoid abrasives/solvents. In coastal sites, weekly freshwater rinses are recommended. Covers are removable for laundering.

Q6: What’s the typical lead time?
Standard production lead time is 30 days, with global shipping support for project rollouts.